Map Reading Light Handling and Movement Limits

Effectivity: Global Express, Global XRS, Global 5000, Global 5000 Vision Flight Deck, Global 6000, Global 5500 and Global 6500
ATA: 33

By: Jonathan Coulombe, Technical Services

This article is to inform Operators that Bombardier has observed instances of damage to the flight deck map reading light P/N 2LA456026-00 in service. In some cases, damage to the swivel mechanism has resulted in loss of functionality and replacement of the light assembly.

The map reading light is designed with a defined and limited range of motion. If excessive force is applied, or if the light is manipulated beyond its intended movement limits, damage to the swivel mechanism may occur. Mechanical damage may subsequently contribute to electrical failures of the unit.

Mechanical damage may also occur when unintended loads are applied to the map reading light assembly. Care should be taken during nearby maintenance activities, as accidental contact or loading of the light may damage the rotation and pivot mechanisms. Maintenance findings have also identified damage to the wires, including chafed wires, unlocked contacts, and damaged splices, which may result in intermittent operation or complete loss of light functionality.

For comparison, the previous map reading light P/N 2LA005163-25 could be tilted up to 60° and rotated up to 300°. The newer map reading light P/N 2LA456026-00 provides a tilt angle of 0° to 90° and a rotational range of ±180° about the longitudinal axis of the swivel joint.

Bombardier recommends:

  • Adjust the map reading light using the intended rotation and pivot functions only.

  • Avoid excessive force or movement beyond the allowable travel limits.

  • Ensure flight crews and maintenance personnel are familiar with the light movement envelope.

  • Avoid unintended loads or contact with the light assembly.

  • Exercise caution during nearby maintenance activities, particularly windshield, side window, and cockpit trim panel removal or installation. When performing maintenance in the vicinity of the map reading light, inspect the assembly, wiring, contacts, and connectors for signs of damage and verify proper operation following maintenance.

Following these recommendations may help reduce mechanical damage, prevent electrical interconnection failures, minimize unnecessary map reading light replacements, improve component service life, and increase dispatch reliability.

Previous
Previous

Recommendations to improve aileron wing cable tension stability  

Next
Next

Lufthansa cabin entertainment software loading